Products

"PAINT REMOVER SOLVENT WITH ALKALINE CHARACTER" 

CS 240

"PAINT REMOVER SOLVENT WITH ALKALINE CHARACTER" 

"PAINT REMOVER SOLVENT WITH ALKALINE CHARACTER" 

EFFECTIVE PAINT REMOVER
CS 240 is an alkali character paint remover solvent. It is preferred as a cold-use paint remover for removing water-based, solvent-based electrostatic paints, wet paints, wax and varnish layers on metal and plastic surfaces in all kinds of industrial sectors. It is especially effective in easily cleaning multi-layer paints formed on powder coating hangers and apparatuses by cold immersion method using paint remover without any heat application. With its powerful paint remover formula, it dissolves the binders of paints and coatings and takes the paint into its body by melting it instead of removing it in pieces leaf by leaf. In this way, it provides a complete cleaning on the surface. Materials cleaned with CS 240 can be re-painted or coated without the need for any processing such as air retention/brushing. It also gives effective results in removing all kinds of waxes and varnishes.

IT IS SAFE
It does not contain acid, it has an alkaline structure. It does not cause rust and corrosion formation on the cleaned metals removed from the paint remover after processing. After the paint remover, there is no need to use a second chemical product, passivation. The paint remover structure consisting of special solvents allows it to be used on all kinds of plastic surfaces. It does not cause deformation or melting. It is used safely as a paint remover even on surfaces made of transparent plastic.  

IT IS ECONOMICAL
It provides cleaning of finished products and equipment that are idle due to improper application, manufacturing errors, wastes by recovering from existing paint, coating. The hanger is used effectively in removing multi-layer paint during cleaning of the bar. Compared to equivalent paint removers, the saturation rate is quite high, the cleaning time is quite short.

AREAS OF USE 
CS 240 as a paint remover; it can only be applied to the surface in a COLD WAY by immersion method. The material is filled directly into the tank to be applied without mixing with water. after waiting for 2 minutes, the cleaned materials are removed from the paint remover.

NOTE: CS 240 is used only by immersion method.

Contact Form